Jack stand users are always concerned about one thing, and that is the reliability of the stands. Ambulance drivers are often called to incidents where jack stands fail. Recently, a driver told me frightening news.
According to him, the pawl part fails because the teeth of the ratchet shave away a tiny bit of the pawl’s tip every time it’s raised. After a while, the worn-down pawls can no longer engage the teeth deeply enough, so the car falls under its own weight.
An emergency room treated 4,822 people with floor jack failure in the course of a one-year study. A lot of use requires years upon years before this wears out, but buy secondhand or replace your old ones if they are a bit worn out.
Consequently, you should never buy secondhand jack stands. When it comes to jack stands, ratcheting stands are more convenient, but you should select a pair of jacks that use a pin and hole or pin through technology when it comes to safety.
![What Are The Safest Jack Stands FI](https://i0.wp.com/www.autoliftjack.org/wp-content/uploads/2021/06/What-Are-The-Safest-Jack-Stands-FI.jpg?resize=750%2C400&ssl=1)
Who Makes The Safest Jack Stands?
A brand that stands out from the rest is Torin. Have a look at their two most popular and safest jack stands.
1. BIG RED T43004 Torin Aluminum Jack Stands with Locking Support Pins
Amongst Torin’s most popular jack stands is the popular T43002A, which offers a more traditional stand design at an affordable price. Featuring a double locking pin design, they are available in 2-ton, 3-ton, and 6-ton capacities. Once in place, they can be conveniently ratcheted to adjust for height.
You can adjust the height anywhere between 11.3 inches and 16.8 inches, which is plenty of room. You will have more clearance and better support because of the wide lifting range. Depending on the situation, there is even a version with a 22.5″ max height.
This stand has a decent footprint, measuring 6.5″ x 7.25″, while fitting most places without much trouble. Featuring robust construction, strong (but messy) welds, a specially designed support head, and an excellent value, the Torin T43002A is a top-notch value.
As well as serving as a carry handle, the saddle column release is also on the dual-purpose handle. This device is equipped with a double locking system that is 200% safer than conventional locks. Using a sawtooth design, the ratchet bar can be adjusted quickly and locked in place. A wide pyramid foot base provides strong and stable support.
The Jack Stands are very sturdy, and you can bet your life on them. I have seen people use these on my 3/4-ton Dodge Ram several times without any fear that they could break. It looks like they used much heavier metal to assemble these, and the welds are really good.
You will have peace of mind with the double-lock feature! These are designed for trucks and SUVs and, unless you jack up the cars much higher than necessary or even safe, will not fit under most cars for basic maintenance work.
Car owners must have a locking pin jack stand at all times. Bumping the locking handle without the pin on a jack can cause the jack to fall, although this is rare. It is easier to drop the jack when there is less weight on the handle.
2. Torin Big Red Double Locking Jack Stands
Aluminum frames make these stands stand out because they are incredibly lightweight (only 4.6 pounds each), giving you freedom of movement in confined spaces. Due to the aluminum construction, the stand won’t rust and won’t become stuck or difficult to operate.
Unlike a ratchet model, pin-through stands are more efficient and reliable because they eliminate the possibility of the stand falling on you.
Additional safety can be provided by the saddle fitting securely under the frame of a car. Torin T43004 is designed for use in conjunction with your vehicle jack to provide a complementary point of use.
Unlike most jack stands, the T43004’s base is not pyramid-shaped. Rather than a traditional hydraulic jack, it resembles a piston-operated hydraulic jack and has a large aluminum base.
It has a flat bottom, which is an additional benefit. Compared to the traditional 4-leg design, this is better at distributing the weight on your garage floor, where the traditional design has a higher chance of ruining your perfect garage floor.
The jack stand’s base is rust and corrosion-free, and the pillar design makes it easier to position it under the vehicle. 10-3/4′′ and 15-5/8′′ are the height ranges for the lift. In technical terms, the minimum height is 9-7/8′′ if the pin is not inserted in the top hole. Because of that, these stands can be used on low clearance cars.
In addition to being lighter and easier to use, these jack stands require half the storage space when not in use, making them a favorite among track and autocross drivers.
This stand’s main disadvantage is that it has a limited height range. Those who have trucks or SUVs might want to look at the ESCO or Omega stands below or even the Sunex high lift stands.
Additionally, it isn’t easy to imagine that these will hold up your vehicle because most of us are used to the pyramid-shaped stands, but they can because they’ve been a bestseller for a long time.
![What Are The Safest Jack Stands](https://i1.wp.com/www.autoliftjack.org/wp-content/uploads/2021/06/What-Are-The-Safest-Jack-Stands.jpg?resize=750%2C400&ssl=1)
Can Jack Stands Fail?
Using multiple jack stands is necessary when lifting a car because jack stands can fail. Although jack stands can carry a great deal of load, they are much lighter and smaller than automobiles.
Even though jack stands are designed not to fail under load, there have been instances where they broke or bent, lowering cars unintentionally. There are many reasons behind the failure of jack stands. Many parts of jack stands can become fatigued or damaged due to the mechanisms they use to lift a lot of weight.
Final Words
These are the safest and most secure jack stands, as you can see. A number of positive reviews have been written about these stands. The market also offers other stands that are equally good for your car.
Leave a Reply